Artist
Thomas Demand

Title
The Collotype Portfolio

Type of work
Photography

Description
The portfolio contains 10 photographic collotype prints, of which each one is by one of the following contemporary photographers: THOMAS DEMAND, ROE ETHRIDGE, GUIDO GUIDI, TAKASHI HOMMA, MAYUMI HOSOKURA, RON JUDE, JOANNA PIOTROWSKA, GREGOIRE PUJADE-LAURAINE, ALEC SOTH and CARLY STEINBRUNN. Slipcase format 31 x 38 x 6 cm. /12.2 x 15 x 2.4 inches, print collotype format 29 x 36 cm. /11.4 x 14.2 inches. Each collotype print is produced on a range of Japanese Washi papers. Each print is signed and numbered, and presented in a different coloured card portfolio. Number of edition is 10. The entire collection is housed in and embossed in a hardback slipcase displaying all the artists names.

Collotype is a dichromate-based photographic process invented by Alphonse Poitevin in 1856 and used for large volume mechanical printing before the existence of cheaper offset lithography. It can produce results difficult to distinguish from metal-based photographic prints because of its microscopically fine reticulations which comprise the image. Many old postcards are collotypes. Its possibilities for fine art photography were first employed in the United States by Alfred Stieglitz.
            The collotype plate is made by coating a plate of glass or metal with a substrate composed of gelatin or other colloid and hardening it. Then it is coated with a thick coat of dichromated gelatin and dried carefully at a controlled temperature (a little over 50 degrees Celsius) so it ´reticulates´ or breaks up into a finely grained pattern when washed later in approximately 16 °C water. The plate is then exposed in contact with the negative using an ultraviolet (UV) source which changes the ability of the exposed gelatin to absorb water later. The plate is developed by carefully washing out the dichromate salt and dried without heat. The plate is left in a cool dry place to cure for 24 hours before using it to print.
            To produce prints, the plate is dampened with a glycerine/water mixture which is slightly acidic, then blotted before inking with collotype ink using a leather or velvet roller. A hard finished paper such as Bristol is then put on top of the plate and covered with a tympan before being printed typically using a hand proof press. Collotypes are printed using less pressure than is used in printing intaglio or stone lithography. While it is possible to print by hand using a roller or brayer, an acceptable consistency of pressure and even distribution of ink is most effectively achieved using a press.
            Because of its ability to print fine detail, it was also used for business cards and invitations with fine script lettering. (Wikipedia)

Price
11.500 EUR
Contact Gallery